Asahi Ball Valves
Asahi Actuated Ball Valves
Asahi Ball Check Valves
Asahi Swing Check Valves
Asahi Butterfly Valves
Asahi Actuated Butterfly Valves
Asahi Diaphragm Valves
Asahi Actuated Diaphragm Valves
Asahi Globe Valves
Asahi Labcock Valves
Asahi Gate Valves
Asahi Constant Flow Valve
Asahi Y-Strainers
Flange and Valve Gaskets

Asahi Series 92 Electric Actuated Butterfly Valve

Size Range: 1-1/2" - 8"

Consists of:  

 

UL-508 listed Series 92 Electric Actuator, 120 vac, Open/Close, Nema 4X,5 sec cycle time, 2 end of travel and 2 extra limit switches, beacon indicator,manual override, factory mount and test to T-57 Butterfly valve.


Features and Benefits

  • Standard model (1-1/2" - 14") has PVC Body and PP Disc for better chemical resistance at temperatures higher than can be achieved with PVC.
  • Our 316/403 stainless steel shaft has full engagement over the entire length of the disc and is a non-wetted part, totally isolated from the media.
  • Only solid and abrasion-resistant plastic disc and elastomeric liner are wetted parts.
  • ISO bolt circle on top flange - no body or stem modifications required for accessories.

Features and Benefits
        Motor: Reversing, brushless, capacitor run 115 VAC 50/60 Hz, single phase
        RoHS compliant
        UL-508 approved
        Overload protection: Integral thermal overload protection for motor windings with automatic reset
        Gear train: Permanently lubricated, solid gear that is Rockwell hardened
        Corrosion resistant housing: Thermally bonded, baked powder coating with stainless steel trim
        ISO mounting configuration
        Conduit: Two 1/2" NPT conduit entries to eliminate cross feed between control, feedback and power signals
        Position indication: Highly visible beacon position indicator for positive position of valve, even at a distance
        Declutchable manual override: Pull up on indicator knob, insert 5/8" wrench onto flats and rotate in the appropriate direction (CCW for open, CW for close). Models with handwheel override do not require a wrench. Simply push down on handwheel until engaged with cam and rotate
        Limit switches: Standard end-of-travel limit switches can be used for light indication (not to be used with PLC for position confirmation)
        Enclosure: Combination NEMA 4X, 7 and 9 enclosure for use in various environments
        Corrosion resistant mounting: Mounting is with PPG or stainless steel bracket, stainless steel coupling, and stainless steel hardware
        CE compliant motor: All 115 VAC and 230 VAC motors are CE compliant and stamped as such
        Extended duty cycles: Our extended duty cycles are ideal for modulating and high cycling applications
        Output torque: Series 92 Electric Actuators have an output torque range from 400 in/lbs to 2000 in/lbsSize Ranges: 1/2" to 4"
Engineering Specifications
         Size: S92, A92, B92 and C92
         Torque: 400-2000 in/lbs
         Voltage: 120 VAC 1Ph 50/60 Hz
         Amp Draw: S92, B92 .5A, A92 .8A, C92 1.0A
         Conduit Entry: Two 1/2" NPT
         Max Ambient Temperature: 150ºF
         Switches: Two single pole, double throw (2SPDT) 15 amp rated
         Cycle Time per 90º: S92, A92: 10 seconds; B92, C92: 25 seconds

Choose Material Desired:

 


 
 
 
Search
Shopping Cart
Your cart is empty.